|
Sewing Instructions
1.
Define the desired width and length of the skirt. Determine the width as follows: measure your hips respectively the broadest part of your body and add 5-10 cm, depending on whether you want a loose or a tight fit.
2.
Double the material and cut a length of material wit the desired width and length.
ATTENTION: When choosing the length of the skirt, orient yourself on the standard lengths of the zippers (25 cm, 30 cm, 40 cm....).
3.
Place both left sides of the material on top of each other. Place the zippers along the long sides of the material between the front and back part of the skirt.
The zipper should be positioned exactly in the middle of the skirt with a possible gap of 2.5 cm to the counter piece.
Sew together both lengths of material with the zippers in between.
Ideally you now have 5 cm of material protrude below and above the respective zipper ends.
Now put two eyelets approximately 1-2 cm below the height of the zipper ends in the front and back material length of the skirt. Repeat the same process on the trim of the skirt.
Tuck up the remainder of the material at the height of the zipper ends and sew them.
Threat the rubber band into a thick needle, pull it through the front eyelet and pull it out again at the back. Now attach the clipper and thread it through the rear of the second eyelet.
Pull it out of the second front eyelet, attach the clipper and stitch together the two ends of the rubber band.
Done!
You can also sew a pocket onto the front as an additional fashionable accessory (see photo).
|
 |
|
